Currency:
USD
  • USD
  • EUR
  • GBP

Products

ZZ9x Hyd. Roller Camshaft (SHIP DATE 10/27/20)

Designed specifically for forced induction and nitrous engines, this cam takes the intake lobe wi...

Designed specifically for forced induction and nitrous engines, this cam takes the intake lobe with 226 duration and .520" lift from our ZZ409 and the exhaust with 239 duration and .558" lift off our ZZx for an incredibly wide power band. This is a perfect fit for a small block with a MiniRam intake and a supercharger or turbo.  With the exhaust lobe profiled specifically for scavenging, this cam is not recommended for naturally aspirated engines.  This is a billet cam with a step nose for re...

$375.00

ZZ9x Hyd. Roller Camshaft (SHIP DATE 10/27/20)

Designed specifically for forced induction and nitrous engines, this cam takes the intake lobe wi...

Designed specifically for forced induction and nitrous engines, this cam takes the intake lobe with 226 duration and .520" lift from our ZZ409 and the exhaust with 239 duration and .558" lift off our ZZx for an incredibly wide power band.  This is a perfect fit for a small block with a MiniRam intake and a supercharger or turbo.  With the exhaust lobe profiled specifically for scavenging, this cam is not recommended for naturally aspirated engines.  This is a billet cam with a step nose for r...

$375.00

ZZx Hyd. Roller Camshaft (SHIP DATE 10/27/20)

This is the largest hydraulic cam we offer for the SBC/LT engines.  This cam with its 239 degrees...

This is the largest hydraulic cam we offer for the SBC/LT engines.  This cam with its 239 degrees of duration and .558" lift, is streetable, but is intended for race engines.  Extremely potent on bigger MiniRam small blocks and LT engines, and very good on high strung 350s  Has a very choppy idle but still has moderate vacuum levels.  Automatics need a 3000+ stall converter.  525hp on a 383cid with our Dart heads. This is a billet cam with a flat nose for the 55-86 SBC, has a cast iron distr...

$375.00

ZZx Hyd. Roller Camshaft (SHIP DATE 10/27/20)

This is the largest hydraulic cam we offer for the SBC/LT engines.  This cam with its 239 degrees...

This is the largest hydraulic cam we offer for the SBC/LT engines.  This cam with its 239 degrees of duration and .558" lift, is streetable, but is intended for race engines.  Extremely potent on bigger MiniRam small blocks and LT engines, and very good on high strung 350s  Has a very choppy idle but still has moderate vacuum levels.  Automatics need a 3000+ stall converter.  525hp on a 383cid with our Dart heads. This is a billet cam with a step nose for retainer plate on the 87-94 SBC or ...

$375.00

ZZx Hyd. Roller Camshaft (SHIP DATE 10/27/20)

This is the largest hydraulic cam we offer for the SBC/LT engines.  This cam with its 239 degrees...

This is the largest hydraulic cam we offer for the SBC/LT engines.  This cam with its 239 degrees of duration and .558" lift, is streetable, but is intended for race engines.  Extremely potent on bigger MiniRam small blocks and LT engines, and very good on high strung 350s  Has a very choppy idle but still has moderate vacuum levels.  Automatics need a 3000+ stall converter.  525hp on a 383cid with our Dart heads. This is a billet cam with a step nose for retainer plate and long pin on the 9...

$375.00

Liquid error: Could not find asset snippets/customization-tool.liquid