Products
"Lil Chubs" Hyd. Roller Camshaft 1987-97 TPI SB...
This cam makes a big lump of torque in the middle of the power band and still revs nicely to 6,00...
This cam makes a big lump of torque in the middle of the power band and still revs nicely to 6,000-6,500 RPM. Excellent for TPI and LT Street engines! 283/287 Adv. Duration 220/224 Duration @ .050 .500/.500 Lift 110 LSA
$375.00
Most factory engines operate at higher temperatures than necessary and therefore robs potential...
Most factory engines operate at higher temperatures than necessary and therefore robs potential power from the engine. Our low-temp 160deg. thermostats are an easy and effective way to lower the operating temperature of your engine. With a lower operating temperature, your engine will be less prone to detonation and can maintain lower incoming air temperatures. Both are important factors in maintaining maximum efficiency. Not recommended for winter use in cold weather climates!
$24.95
Most factory engines operate at higher temperatures than necessary and therefore robs potential...
Most factory engines operate at higher temperatures than necessary and therefore robs potential power from the engine. Our low-temp 170deg. thermostats are an easy and effective way to lower the operating temperature of your engine. With a lower operating temperature, your engine will be less prone to detonation and can maintain lower incoming air temperatures. Both are important factors in maintaining maximum efficiency. Can be used with our 160deg. Coolant Fan Switch to turn on th...
$22.95
Originally found on the 93-97 1LE Camaro/Firebird, this part is a great way to get rid of the "sn...
Originally found on the 93-97 1LE Camaro/Firebird, this part is a great way to get rid of the "snorkel" on most factory intake ducting. This is also a great part to use on your street rod when you need to put an air filter off to the side to get it out of the way of the warm radiator air. Use a piece of 3" tubing and any aftermarket air cleaner to create your own custom intake duct. Fits all TPI and LT1/4 throttle bodies.
$95.00
These 24lbs/hr injectors are manufactured by Holley and should be used on engines from 350-450 ...
These 24lbs/hr injectors are manufactured by Holley and should be used on engines from 350-450 HP. These injectors produce the best spray pattern when used with 43-50 psi of fuel pressure. All of the injector sets we sell are flow matched to ensure each cylinder is getting the same amount of fuel. Sold in sets of 8.
$525.00