Products
Labor/Chassis Dyno Tuning Honda Civic
- Check Camshaft Timing w/Crankshaft TDC - Check/Adjust Spark Plug Gap .045 - Chassis Dyno- Preli...
- Check Camshaft Timing w/Crankshaft TDC - Check/Adjust Spark Plug Gap .045 - Chassis Dyno- Preliminary tuning, part throttle load/engine break-in time, general check over. Check valve adjustment after heat cycling and break-in time and check/adjust ignition timing offset at distributor is 27 degrees at 1600 RPM. Make needed fuel and timing changes in ECU maps, advance retard camshafts for best performance. Camshafts at "zero" position delivered best average power in RPM range being used. Fu...
$1,360.00
The quickest, easiest way to remove valve springs with the heads on the engine. Just remove the ...
The quickest, easiest way to remove valve springs with the heads on the engine. Just remove the rocker arm, put this tool in its place and using a 3/8" drive ratchet, pull the tool down on the retainer and remove the valve locks (keepers). The low profile works great for getting to the back of the engine on F-body cars. You will, of course, need to pressurize the cylinder to keep the valves from dropping, and the easiest way to do that is with our cylinder pressure tool. Works on LS1, LS2...
$69.95