Cams
ZZx Hyd. Roller Camshaft (EST. SHIP TIME 3-4 W...
This is the largest hydraulic cam we offer for the SBC/LT engines. This cam with its 239 degrees...
This is the largest hydraulic cam we offer for the SBC/LT engines. This cam with its 239 degrees of duration and .558" lift, is streetable, but is intended for race engines. Extremely potent on bigger MiniRam small blocks and LT engines, and very good on high strung 350s Has a very choppy idle but still has moderate vacuum levels. Automatics need a 3000+ stall converter. 525hp on a 383cid with our Dart heads. This is a cam with a step nose for retainer plate and long pin on the 95-97 LT1...
$375.00
ZZ10 Hyd. Roller Camshaft Retro-Fit SBC
This 233/240 split duration cam is a good choice for a large displacement LT or small block fitte...
This 233/240 split duration cam is a good choice for a large displacement LT or small block fitted with a MiniRam intake. Its .538"/.560" lift numbers really benefit bigger heads and with the addition of 1.6 rockers on the intake, you can bump the lift to .568" for even more air flow. This cam has a choppy idle, but still retains good vacuum. For automatic cars it works best with a 2400-3000 rpm stall converter. This is a cam that has a flat nose for 55-86 SBC, and has a cast iron distribu...
$375.00
ZZ9x Hyd. Roller Camshaft ** Est. ship time ...
Designed specifically for forced induction and nitrous engines, this cam takes the intake lobe wi...
Designed specifically for forced induction and nitrous engines, this cam takes the intake lobe with 226 duration and .520" lift from our ZZ409 and the exhaust with 239 duration and .558" lift off our ZZx for an incredibly wide power band. This is a perfect fit for a small block with a MiniRam intake and a supercharger or turbo. With the exhaust lobe profiled specifically for scavenging, this cam is not recommended for naturally aspirated engines. This is a cam with a step nose for retainer...
$375.00
ZZ9x Hyd. Roller Camshaft ** Est. ship time...
Designed specifically for forced induction and nitrous engines, this cam takes the intake lobe wi...
Designed specifically for forced induction and nitrous engines, this cam takes the intake lobe with 226 duration and .530" lift from our ZZ409 and the exhaust with 238 duration and .546" lift off our ZZx for an incredibly wide power band. This is a perfect fit for a small block with a MiniRam intake and a supercharger or turbo. With the exhaust lobe profiled specifically for scavenging, this cam is not recommended for naturally aspirated engines. This is a cam with a step nose for retainer ...
$375.00